Conversation Bubbles Thank You Card
All
images © 1990-2021 Stampin’ Up!®
·
Stamp Sets: Conversation Bubbles (160628); or as a
discounted bundle with Conversation Bubbles Dies (160637)
·
Card Stock and Paper: Coastal Cabana (131297); Basic
Black (121045); Basic White (159276); Silver 12”x12” Specialty Pack (156457)
·
Stamp Pads: Tuxedo Black Memento Ink (132708);
Coastal Cabana Ink (147097)
·
Miscellaneous: Seasonal Label Dies
(156299); Very Best Trio Punch (159878); Foam Adhesive Strips (141825); Stampin’
Dimensionals (104430); Stampin’ Seal Adhesive (152813)
Measurements:
·
Coastal
Cabana: 3 ½” x 11” scored at 5 ½”
·
Basic
Black: 4” x 3”, scraps
·
Basic
White: 5 ¼” x 3 ¼” (x2), scraps
·
Silver
Foil: scraps
Instructions:
1.
Fold
cardstock base in half on score line.
2.
Round
corners of card base, 2 white cardstock panels, and black card stock panel.
3.
Adhere
white cardstock panels to card front, and inside of card.
4.
Adhere
black cardstock panel to card front.
5.
Decide
which bubbles and sentiments you want to use and stamp them using Coastal
Cabana and Tuxedo Black Memento Inks on scrap white card stock.
6.
Die
cut sentiments using Conversation Bubbles Dies and adhere to black cardstock
using Dimensionals and Foam Adhesive Strips.
7.
Punch
or die cut a ½” circle (from your stash) from silver card stock.
8.
Adhere
to bottom middle of iPhone, using a Dimensional.
9.
Punch
1/8” black cardstock circle (from your stash).
10. Cut 1/8” x ½” black card stock strip.
11. Die cut silver foil strip ( from
Seasonal Labels Dies).
12. Adhere all 3 of these items to the top
of the card as shown in photo.
Happy Stampin' Everyone!!!
Something Fancy
All
images © 1990-2023 Stampin’ Up!®
·
Stamp Sets: Something Fancy (160416)
·
Card Stock and Paper: Basic White Card Stock (159276); Soft Sea Foam
Card Stock (146988); Fancy Flora 6” x 6” Designer Series Paper (DSP) (160413)
·
Stamp Pads: Orchid Oasis Ink (159214)
·
Tools: Something Fancy Dies (160424);
Painted Texture Embossing Folder (154317); Stampin’ Cut & Emboss Machine
(149653)
·
Miscellaneous: Brushed Brass Butterflies
(158136); Pool Party Grosgrain Ribbon (160430); Stampin’ Dimensionals (104430);
Stampin’ Seal Adhesive (152813)
Measurements:
·
Soft Sea Foam: 5 1/2” x 8 ½” scored @ 4 ¼”, 1” x 3”
·
Basic White: 5 1/2” x 4 ½”
·
DSP: 5 ¼” x 1 ¼”
·
Ribbon: about 10 inches
Instructions:
1. Measure, score, and cut your
paper using the measurements above with your Paper Trimmer.
2. Die cut with the Something
Fancy Dies the banner in Soft Sea Foam and stamp the “Happy Birthday” with the
Orchid Oasis ink.
3. Emboss the Basic White with Painted
Texture Embossing Folder with the Stampin’ Cut & Emboss Machine.
4. Glue the DSP to the Basic
White onto the far-left side.
5. Keep the ribbon on the spool
and make a bow with at least 4 inches on the left side of the bow and 6 inches
to the right of the bow. Place a glue dot on the back of the knot of the bow
and place along the DSP edge. Glue the ends of the ribbon to the back of the
Basic White with Stampin’ Seal. Put Stampin’ Dimensionals on the back and
attach it to the card base.
6. Attach the stamped banner
with Stampin’ Dimensionals onto the Basic White near the bow.
7. Embellish with 3 of the
Brushed Brass Butterflies (see photos for placement).
Happy Stampin' Everyone!!!
Sea Turtle
All
images © 1990-2023 Stampin’ Up! ®
Supplies:
·
Stamp Sets: Sea Turtle (160500); Charming Sentiments (159985)
·
Card Stock: Basic White (CS) (159276); Crumb Cake (CS) (120953); Mint Macaron
(CS) (138337); Granny Apple Green (CS) (146990);
·
·
Tools: Sentiment
Silhouettes Dies (159734); Seaside Bay Dies
(160444)
Measurements:
·
Crumb Cake: 4 ¼ “x 8 ½”, 4 ¼” x 5 ½”, scrap
·
Basic White: 4” x 5 ¼”, 3 ½” x 3 ¾”
·
Designer Series Paper: 4” x 5 ¼”, 2 ½” x 4”
Instructions:
· Cut
a piece of Crumb Cake 8 ½” x 4 ¼” and score on the long side 5 ½”, 8 ¼”, to
make the card base. Cut another Crumb Cake piece 5 ¼” x 4.
· Cut
a piece of Basic White 4” x 5 ¼”
· Use
blending brushes to make seascape scene on Basic White sheet just cut. I
started with Costal Cabana then Balmy Blue then a little Daffodil Delight at
the top to show the sun showing through. Adhere to Crumb Cake piece that is 5
½” x 4 ¼”
· Die
cut the seaweed / plant pieces using the Seaside Bay dies. Use Granny Apple
Green and Mint Macaron.
· Using
a scrap piece of Crumb Cake stamp the small sand dots from the Seaside Bay set
to create sand. Cut so it is 4” wide then tear off top to create sand as shown.
· Adhere
the plants to the back of the sand piece you created as shown. Then adhere the
Crumb Cake sand piece to the seascape you created on the 4” x 5 ¼” Basic White
sheet as shown.
· Adhere
the seascape piece to the 4 ¼” x 5 ½” Crumb Cake piece. Then adhere this piece
to the front of your easel card with Stampin’ Seal +.
· Stamp
large and small turtles in Pacific Point. Then clean stamp and turn over and
stamp on turtle you just stamped with Mint Macaron stamped off. This will color
in the turtle’s body in. Do the same with large and small turtles. Fussy cut the turtles.
· Adhere
turtles to seascape piece using Stampin Dimensionals.
· Stamp
sentiment with Versamark and emboss with White embossing powder then die cut
with matching die and adhere to front of card with dimensionals so the easel
portion will lean on this and be able to stand up.
Loveliest Layers Decorative Masks
All
images © 1990-2023 Stampin’ Up!®
Supplies:
·
Stamp Sets: Something Fancy (160416)
·
Card Stock and Paper: Pool Party Card Stock (122924); Basic Black Card
Stock (121045); Basic White Card Stock (159276)
·
Stamp Pads: Polished Pink Classic Stampin’ Pad (155712); Daffodil
Delight Classic Stampin’ Pad (147094); Melon Mambo Classic Stampin’ Pad (147051);
Pear Pizzazz Classic Stampin’ Pad (147104); Granny Apple Green Classic Stampin’
Pad (147095); Tuxedo Black Memento Ink (132708)
·
Tools: Something Fancy Dies (160424);
Loveliest Layers Decorative Masks (160517)
·
Miscellaneous: Basic Black Stampin’ Write
Marker (100082); Small Blending Brushes (160518); Flat Adhesive-Backed Pearls
(160449); Stampin’ Dimensionals (104430); Stampin’ Seal Adhesive (152813); Mini
Stampin’, Cut & Emboss Machine (150673)
Measurements:
·
Pool Party Card Stock: 8 1/2” x 5 1/2”, ¾” x 3 ½”
·
Basic Black Card Stock: 5 3/16” x 3 15/16”
·
Basic White Card Stock: 3 ¾” x 5”
Instructions:
1. Tape, with painters’ tape or
washi tape, the Basic White on Scrap paper.
Tape the large flower mask over the cardstock it should cover it
completely.
2. With a small blending brush,
using a circular motion, apply Polished Pink Ink avoiding the center of the
flower and darkening the edges of the flower petals.
3. With a small blending brush
apply daffodil delight ink to the center of the flower.
4. Remove that mask and overlay
the Basic White with the flower detail mask and tape down. With a small blending brush apply Melon Mambo
ink over the whole mask openings. Remove Mask and tape down the leaves mask.
5. Using a small blending brush
apply Pear Pizzazz Ink to the leaves. Remover mask and apply detail leaf mask
and tape down.
6. Using a small blending brush
apply Granny Apple Green ink to the leaf details. Remove this mask.
7. With a Black Stampin Write
marker and the fine tip outline all images give it a whimsical look. Outline the edges of the paper going around
it two times with a wavy hand overlapping your lines back and forth.
8. Stamp the greeting on the strip
of Pool Party and die cut with a Mini Stampin’, Cut & Emboss machine.
Adhere greeting to card as shown using Stampin’ Dimensionals
9. Adhere the layers to the
card base.
10. Add 3 Flat Adhesive Backed Pearls
Welcome to the NEW AT SU! Blog hop! We are a group of Stampin ’ Up! Independent Demonstrators from around the world who are full of creati...
